eHam.net Classifieds Search Results

Garmin 4 pin cables

Three Garmin cables all in excellent condition. 1- 4 pin round Garmin connector to serial adaptor for PC, 1- 4 pin round Garmin connector to Kenwood TH-D7 connector, 1- 4 pin round Garmin connector with 12 volt cable and serial connector. Pics on request $35 for all three, includes shipping to 48 contigious states.

FS: MFJ-1272B TNC/Mic switch

FS: MFJ-1272B TNC/Mic switch Used, works. $30 shipped CONUS. Prefer paypal.

micro KEYER II

$380.00 About a dozen hours of use on this ever so gently used microHAM micro KEYER II, deciding digital modes weren't my cup of tea. Purchased new in late October along with cable for my ftdx9000mp. Cable is not included and will at a later day appear on eBay. Buyer will need to purchase a cable for their specific rig from microHAM or homebrew a cable. (Unless you happen to be using the Yaesu ftdx9000mp/d/contest, we can work out a deal for the cable as well.) So for now I am selling just the micro KEYER II which comes with everything shown in the picture. USB cable, 3.5 mm audio cable (sub-receiver audio), RCA to RCA cable (PTT IN), coaxial 2.1mm/5.5mm power plug, and CD-ROM containing the microHAM USB Device Router program and documentation. Money order or possible PayPal respond direct to kq6i at arrl dot net

MicroHam USB Interface II

These USB Interfaces provide a solution to the lack of available Serial (COM) ports on laptop and newer desktop computers for controlling your radio. The USB interface II includes full optical isolation of all control signals (radio control, CW, PTT and Squelch) and high quality audio transformer isolation (with level trimmers) for audio to your radio's rear panel audio input and from the radio's constant level audio. microHAM USB Interfaces have built-in hardware support for your radio - you no longer need additional level converters like CT-62, IF-232, FIF-232, CT-17. The drivers include support for software CW keying (DTR) and PTT (RTS) - there is no need for additional interfaces. Unlike common mass market computer "USB to Serial adapters" our USB Interfaces are carefully designed for maximum immunity from strong RFI and at the same time be "RF quiet". Each data line is low pass filtered for minimum interference. Package includes: micro USB Interface II™, CD ROM with drivers, control software and manual, USB A-B cable, two sound card cables, and one Icom radio cable. You can read more at http://microham-usa.com/products/usb.html I will accept PayPal or money order for $145.00 shipped in continental U.S.A. You may reach me at [email] k9on@att.net or (630) 673-6704 after 6:00 PM CST

signal link sl-1

signal link sl-1+ sound card radio interface used for receive only $50 usps money order pob/k8len

AEA PK 900

AEA PK 900 Dual port with Pactor, no DSP. I bought new in 1995 from HRO. Version 7.1 firmware updated March 1996. Serial # 3180. Original box, manual and some cables. Good clean condition, have not used it for several years but worked perfectly. No terminal program software, think I used Packratt but not sure. This is a very serious piece of equipment and I cannot answer questions about how to operate it. The manual is very comprehensive. Used it originally with Kenwood TS440 and 2meter rig. Strongly advise you read the reviews on E-Ham before purchasing and understand what you are getting.Not a penny less than $270, shipped to lower 48 but would discount $20 if you pick up from south Mississippi. 73, de Mike, WM5DX

Kantronics KPC-3 Plus.

Now sold, many thanks to all who responded. KPC-3 Plus 128K version 7. Box dated 1997.Original box, manual, and terminal program floppy disc.I do not know what version of Windows the floppy will work with. I purchased from HRO 6.10.97. Some cables. Very little use, I don't remember which radio I used it with, my tags on the cables say Icom 2000H. Was working perfectly. Needs 6 - 25 volt DC power or user can install 9 volt battery. I do not have the 2.1 mm power jack plug it came with, you will need one (RadioShack?). I used it with a wall wart. Very clean condition, non smoker. Manual like new. $80, including shipping to lower 48. Current location is Mississippi gulf coast. Phone is 214 315 9976, I think E-ham has wrong number on file. 73, de Mike, WM5DX.

G4ZLP, DigiMaster USB MiniPro 2

The Digi Master USB MiniPro2 is used to connect your computer to your Transceiver thru the USB port of your computer. 5 cables necessary for ICOM rigs Are included for the 756PROIII the 7600,7700 and 7800. and many other rigs $50.. + postage

Kantronics All Mode TNC

I have what I think is an original Kantronics All Mode TNC with all the paperwork and software (Hostmaster II+). Make offer. No PS or cables included, just TNC, books, and software. Everything appears to be in excellent condition

Kantronics KPC3 +

Kantronics KPC3 + in excellent condition. TNC only, no cables ver 9.0 $160.00 shipped (to lower 48) bluesoftail98@hotmail.com

FS: MICROHAM USB III/K3 CABLES

I have a like new MICROHAM USB III Digital interface. It comes with the plug and play interface cable for the Elecraft K3 (Others are available or can be made). It has hardly been used and I am the original non-smoking owner. It comes with the original boxes and CD. It is only 4 months old. Read about it at: http://www.microham- usa.com/Products/USB3.html I will ship this unit in the Lower 48 States for $170. Payment via PayPal or USPS MO. If interested, drop me an email at: k2wo at arrl.net NO PHONE CALLS PLEASE!

DRSI Type 2 TNC's

Have 2 DRSI Type 2 (1200b TNS's) with spare modem chip. Requires ISA slot. Make offer.

Signalink USB Wanted

Looking for a Signalink USB with all original accessories. Need 13 pin Kenwood and or 8 pin Icom if available. Let me know what you have.

DV Dongle for D-Star from your PC

I have a lightly used DV-Dongle, it works great, come with USB pig tail, works for several platforms, latest drivers and software for your particular platform available from website as always being updated. Enjoyable way to listen and talk to repeaters across the world on the new Digital mode, not using as much since I upgraded my IC-2200 with D- star capabilities. Ron N9QGS Asking $160 shipped all 50 states priority mail. accept pay pal or money order. n9qgs@scottky.us

MFJ-1272MYV

MFJ-1272MYV TNC switch with modular plug for KAM and KPC-3. I pay for shipping. $40.00

Saratoga EZ-PSK 706/3

Saratoga EZ-PSK 706/3. I picked up a Signalink, so I don't need this anymore. $25.00 shipped. Would prefer paypal.

Kantronics KAM All-Mode

Lightly used. Version 5. In original box with cables, connectors and manual. Missing the 12V AC/DC transformer, however. Asking $75 plus $10 shipping (CONUS only). PayPal Ok.

Kantronics All Mode

KAM, Kantronics All Mode, with all cables ready, and manual, low use, price $98.00, only accept Postal Money Order

ICOM CT-17 CI-V Level Converter

The ICOM CT-17 CI-V Level Converter allows the connection of Icom radio's to a personal computer RS-232C port. In fact, up to four Icom CI-V transceivers or receivers can be connected via the CT-17 at once! $65+USPS SOLD 73

HAL RTTY-1 Tuning Unit

For Sale: HAL RTTY-1 rtty tuning indicator. Excellent condition. Includes manual. $85 shipped in CONUS.

RigBlaster No Mic. Reduced

Rig Blaster (No Mic) cables, latest CD software. On board jumpers allow for Yaesu, Kenwood, Icom connections. Comes with copy of instruction book.Connections already jumped for Yaesu but can be easily changed to other mfg'r. Shipped only to upper USA 48. $49.00 Please help with shipping.

JPS NIR-10

JPS NIR-10 dsp filter. Has noise reduction, auto notch and adjustable bandwidth. Very clean condition Works well. Asking $50.00 you ship ,m/o is fine. you can contact me at kc8ysl@yahoo.com link to picture: http://www.flickr.com/photos/26928618@N04/3704685032/in/photostream/ thanks robert

RIGblaster NOMIC rig-to-soundcard interface

Complete, new last fall, tested okay, not used due to rig change. $45 + $10 ship.

HAL ST-5000 RTTY Terminal Unit

HAL ST-5000 factory unit. Nice condition. $50 or best offer plus shipping, PayPal okay.

RTTY Meister PC

I'm offering one excellent RTTY PC with Windows XP Embedded on a 1GHz Processor on a Mini-ITX form factor Motherboard. Unit has 512MB IDE flash drive, 512MB Ram and 3 serial ports. Unit will do a great job when used as part of your RTTY Contesting Station. Unit comes with a 12VDC AC adapter. $125 plus shipping. A small pdf with full description can be found here: http://dxusa.net/rttymeister.pdf John W1AN jms @ 99main.com