|
New to Ham Radio?
My Profile
Community
Articles
Forums
News
Reviews
Friends Remembered
Speak Out
Strays
Survey Question
Operating
Contesting
DX Cluster Spots
Propagation
Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers
Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net
|
|
1-4 of 4 messages
|
  Page 1 of 1  
|
|
"T" shaped longwire ?
|
Reply
|
|
by SWL177 on August 28, 2008
|
Mail this to a friend!
|
Would a T shaped longwire work for HF ? Approx 17m then toped with another 10m .
Regards
|
|   |
|
RE: "T" shaped longwire ?
|
Reply
|
|
by KF7CG on August 28, 2008
|
Mail this to a friend!
|
Though not as long in any dimension as you might want this is a "classic" receive antenna design. It works well to the higher impedance input of many of the older SWL receivers.
KF7CG
|
|   |
|
RE: "T" shaped longwire ?
|
Reply
|
|
by WB6BYU on August 28, 2008
|
Mail this to a friend!
|
Presuming that you had a good ground connection right at the base
(preferably a radial field, either on the ground or elevated) the antenna
is self resonant around 3 MHz. Below that it wil need some series
inductance to bring it to resonance, but it should receive reasonably
well.
The pattern is pretty good up to 8 MHz or so, where the antenna is about
5/8 wave. From there performance is usable (though not wonderful) up
to about 16 MHz or so. Above that the pattern falls apart and is mostly
at high angles that aren't very useful.
You can use it for transmitting with a good tuner at the base. If you
don't have a good ground system, the efficiency will suffer and you
may end up with RF in unwanted places in the shack.
|
|   |
|
Email Subscription
You are not subscribed to this topic.
Subscribe!
My Subscriptions
Subscriptions Help
Check our help page for help using
Forum, or send questions, comments, or suggestions to the
Forum Manager.
|
|
|