ICOM 2200H wiring to Rigblaster Plus - ComputersAndSoftware Forum at eHam.net

eHam.net Forum : ComputersAndSoftware : ICOM 2200H wiring to Rigblaster Plus

Forum Help

1-1 of 1 messages

Page 1 of 1

ICOM 2200H wiring to Rigblaster Plus	Reply
by KF0X on October 23, 2008	Mail this to a friend!
Hello! I have a Rigblaster Plus and am trying to wire in an ICOM 2200H. The Rigblaster is jumpered correctly (as it tells you in the manual for the Rigblaster) and the radio is connected correctly into the mic jack on the 2200H. The Rigblaster relay kicks in when the software tells it to, however, it does not key the radio no matter what I do. I know the 2200H is keyed through a microprocessor rather than a traditional PTT connection. However, I know FOR SURE it can be wired to this radio. I used this radio with a Rigblaster several years ago with great success. Unfortunately I cannot for the life of me remember how I did it. Maybe it is an alternate jumper setting or something. PLEASE... can you help! Thanks! Randy, KF0X

Page 1 of 1

Next Topic: HRD > 897d Pinout
Previous Topic: AEA DSP-2232 software....

Email Subscription
You are not subscribed to this topic.

Check our help page for help using Forum, or send questions, comments, or suggestions to the Forum Manager.