looking for all kantronics firmware to swap

$\'\'$

$\'\'$

$\'\'$

eHam.net Forum : Digital : looking for all kantronics firmware to swap

Forum Help

1-10 of 14 messages

Page 1 of 2 Next

looking for all kantronics firmware to swap	Reply
by ON7WP on November 1, 2006	Mail this to a friend!
hello progs, as you ham operators all know, kantronics no longer offers any support whatsoever for their older products. It is virtually impossible to obtain eproms for these nice devices as KPC3, KPC9612, KAMplus, KPC9612plus... I have a lot of files available for free use as kantronics no longer is in business for this, but I am also looking for the following files to update my collection: Available KPC3, KAM, KAM+ and KPC9612+ up to version 8.2 KPC9612 up to version 6.0 send me a mail if I can help you out with any of these. looking myself for images of any higher version and desperately looking for KPC9612 version 8.2 all help appreciated if necessary I want to buy eproms or complete units having any of the software mentioned. Please help out lots of hams taken hostage by kantronics foolish policy.... Pedro Wyns ON7WP-AA9HX

THANK YOU ALL !!!! Mission accomplished !	Reply
by ON7WP on December 14, 2006	Mail this to a friend!
Hello fellow ham's, I got lot's of replies to this posting and apparently ham's all over the world are in a simular position taken hostage by the no-longer-upgrade policy of Kantronics. Kantronics left us all alone in the dark with their vintage products, not counting on the huge international hamspirit. All my Kantronics TNC's are back up to the highest possible firmware level that was available before they went out of production and Kantronics no longer supported them. One big advice: Take this firmware policy into account before considering buying their products again. NO SUPPORT - NO SALES !!!! One advice to Kantronics: put old files that are no longer on sold on your website for download. Customers only benefit from this (and all collegue-firms follow this practise). Pedro M.J. Wyns AA9HX-ON7WP

THANK YOU !!! Mission accomplished !	Reply
by ON7WP on December 14, 2006	Mail this to a friend!
Hello fellow ham's, I got lot's of replies to this posting and apparently ham's all over the world are in a simular position taken hostage by the no-longer-upgrade policy of Kantronics. Kantronics left us all alone in the dark with their vintage products, not counting on the huge international hamspirit. All my Kantronics TNC's are back up to the highest possible firmware level that was available before they went out of production and Kantronics no longer supported them. One big advice: Take this firmware policy into account before considering buying their products again. NO SUPPORT - NO SALES !!!! One advice to Kantronics: put old files that are no longer on sold on your website for download. Customers only benefit from this (and all collegue-firms follow this practise). Pedro M.J. Wyns AA9HX-ON7WP

RE: looking for all kantronics firmware to swap	Reply
by VE2VXT on February 23, 2007	Mail this to a friend!
Hello, I have KPC-9612+ with 8.1 firmware. Anybody can send me an unpgrade to turn the TNC into digipeater? Also I have firmware for KPC-3 Version 8.3 and 8.2A for trading... Thank's and best 73' Eric reply to :mour@sympatico.ca

RE: looking for all kantronics firmware to swap	Reply
by VE6SZR on March 15, 2007	Mail this to a friend!
Wondering if someone has access to later firmware for the Kantronics KPC-2 TNC. The KPC-2 is still very useful to me. If someone does have firmware for this old TNC please drop me a line.....ve6szr@rac.ca (A binary file is preferred as I have access to an EPROM burner). 73, VE6SZR

RE: looking for all kantronics firmware to swap	Reply
by KF8ZN on March 26, 2007	Mail this to a friend!
I have a Kam Plus V 8.2 that is working, but OH MY GOD I hate all the crypic commands!! Is there a menu based control program that will help me with all this?? KF8ZN

RE: looking for all kantronics firmware to swap	Reply
by KD6AAJ on April 7, 2007	Mail this to a friend!
http://www.willem.org/yabbfiles/Attachments/kpc3v82.zip KPC-3 non plus (?) version 8.2

RE: looking for all kantronics firmware to swap	Reply
by KD6AAJ on April 29, 2007	Mail this to a friend!
I'd like the KPC-3+ firmware file and the 9612 firmware file. I have the KPC-3 (non-plus) firmware. I'm trying to see if it's possible to read the kpc-3+ eeprom in circuit, and save the older version to disc. The KPC-3+ has a serial EEPROM, and the schematic even shows a jumper for write protect. If anyone else knows how, please share. If I figure it out I will post how.

RE: looking for all kantronics firmware to swap	Reply
by K8COP on April 11, 2009	Mail this to a friend!
Any luck with finding the KPC-9612 non-plus firmware? Jim, K8COP

RE: looking for all kantronics firmware to swap	Reply
by N0ALE on July 3, 2009	Mail this to a friend!
I'm looking for the KPC-9612 non-plus firmware as well if anyone has it, not sure what the latest update on this topic was :). I'd be willing to trade what I can, I dont have much but a bunch of kantronics units i'd like to upgrade. The 9612 is what i'm shooting for, but if anyone has firmware for, or needs firmware for a, i'd be willing to help if i can: Original All Mode KAM DR4-10 KPC-3 and KPC-2

Page 1 of 2 Next

Next Topic: MMTTY on XP
Previous Topic: DX70 on PSK31

Email Subscription
You are not subscribed to this topic.

Check our help page for help using Forum, or send questions, comments, or suggestions to the Forum Manager.

$\'\'$