Rotor Contol Reversable Face Plate - Towertalk Forum at eHam.net

eHam.net Forum : Towertalk : Rotor Contol Reversable Face Plate

Forum Help

1-3 of 3 messages

Page 1 of 1

Rotor Contol Reversable Face Plate	Reply
by W8RID on November 15, 2008	Mail this to a friend!
I have a Ham 2 rotor and control box. It has a North centered meter face on it. Where can I get a South Centered meter face and how do I install/replace the one I have. (If this can be done) Thanks Bob W8RID

RE: Rotor Contol Reversable Face Plate	Reply
by K9KJM on November 16, 2008	Mail this to a friend!
First thing to do is check your present faceplate to see if the back side has the south center face on it. (Many later models did) If it does not, You can buy them from places like Norms: http://www.rotorservice.com/serv1%20repair.htm

RE: Rotor Contol Reversable Face Plate	Reply
by KB9CRY on November 16, 2008	Mail this to a friend!
Take the meter apart (carefully) and flip the faceplate around. The South centered plate in on the other side of the North centered plate.

Page 1 of 1

Next Topic: Yaesu rotator mounting template
Previous Topic: Is a 1/4 wave 6m antenna also resonance for 2m.

Email Subscription
You are not subscribed to this topic.

Check our help page for help using Forum, or send questions, comments, or suggestions to the Forum Manager.